箱体型水冷螺杆式冷水机

箱体型水冷螺杆式冷水机性能稳定：3HP→7HP为单组压缩机，从8HP及以上机型大多采用两台或多台压缩机并联使用：每台压缩机自带一个独立的制冷系统，含蒸发器及冷凝器也完全独立，所有压缩机由统一的控制系统指挥，可实现单系统开机，关机与运行功能。该机型均采用原装正品材料制作，单机故障率极低，该机型具备高度稳定的性能，可作为长年连续运行工作需求之首选。

◆箱体型水冷螺杆式冷水机采用壳管式冷凝器，在使用一定时间内，发现压缩机高压表压力偏高时，方便拆盖维护及保养。

◆箱体型水冷螺杆式冷水机安装时必须要有冷却水塔或其它冷水源与散热循环水泵方可使用，如不具备该条件请选择我司另一款冷水机：箱型风冷式冷水机。

◆The box-type water-cooled chiller has stable performance: 3HP→7HP is a single setof compressors. Most models from 8HP and above use two or more compressors inparallel: each compressor comes with an independent refrigeration system, includingevaporation The condenser and condenser are also completely independent, and allcompressors are commanded by a unified control system, which can realize thefunctions of single system startup, shutdown and operation. This model is made oforiginal genuine materials, and the failure rate of a single machine is extremely low.This model has a highly stable performance and can be used as the first choice forlong-term continuous operation.

◆This model uses a shell and tube condenser. It is convenient to remove the cover formaintenance and repair when the pressure of the compressor high pressure gauge isfound to be high during a certain period of use.

◆The box-type water-cooled chiller must be installed with a cooling water tower orother cold water source and a heat-dissipating circulating water pump before it canbe used. If this condition is not met, please choose another chiller from ourcompany: box-type air-cooled chiller.